EUROPROBE3

 

Capintec 2015 Catalog 525

 

 

Capintec 2015 Catalog 526

The EuroProbe3 meets the demanding specifications of radioguided surgical procedures to identify increased radionuclide uptake in a variety of clinical and surgical settings.

Multiple detector options, size and configurations have been designed to meet specific surgical requirements and assure the versatility to perform optimal radioguided surgical procedures.


• Wireless

• Blue Tooth probe:

• 100 keV to 1 MeV (Tc-99m, In-111, I-131, F-18)
• Collimator integrated in probe for low energy isotopes
• Detector crystal: Csl

• Wired

• Large CsI probe:

• 110keV to 1 MeV

• Straight or angled probes
• High sensitivity straight or angled probes available

• Small CdTe probe:

• 20 keV to 170 keV
• Straight, angled, ROLL or endoscopic probes
• Excellent spatial resolution

 

DETECTOR FEATURES

• High efficiency solid state scintillation detectors operating at room temperature.
• High sensitivity and target to background ratio.
• Can be sterilized with Ethylene Oxide gas.
• Preferred ergonomic angled design.
• Integrated tungsten collimator.
• Additional detachable collimator is available.
• Direct read-out (digital and bar-graph type) through large, easy to read display.
• Pre-set or user definable energy window setting for ultimate flexibility.
• Choice of two types of audible signals proportional to counting rate.
• Both probes are standard.
• Easily switch between probes.

• Store up to 9 custom configurations.

• Built in background subtraction.

• Choice of bent or straight probes.

• Automatic probe identification

• Optional foot switch.

 

EUROPROBE3 SPECIFICATIONS

• Operating Power: 115VAC, F=50Hz, I= 0.5A or 230VAC, F=50HZ, I= 0.250A

• Power Consumption: Max. 15 watts

• Maximum Counting Rate: 15,000 cps/s

• Operating Temperature Range: +15°C to +40°C

 

ITEM MEASUREMENTS

• Dimensions: 9.6" h x 9.1" w x 10.6" d (245 x 233 x 270 mm)

• Weight: 4.4 lbs. (2 kg)

 

ITEM NUMBERS

EuroProbe3 Surgical Probe System................................................5250-0111

includes CsI & CdTe (bent probes)

EuroProbe3 with Bluetooth Probe System.................................... 5250-0152

includes CsI (bent wireless probe)

 

ADDITIONAL PROBES

EuroProbe3 Surgical Probe, (CdTe), Straight .............................. 5250-0117

EuroProbe3 Surgical Probe, Cs(I), Bent ....................................... 5250-0118

EuroProbe3 Surgical Probe, Cs(II), Straight................................ 5250-0119

EuroProbe3 Surgical Probe, CsI, High Sensitivity....................... 5250-0120

EuroProbe3 Surgical Probe, Endoscopic....................................... 5250-0121

 

OPTIONAL ACCESSORIES

Source Holder................................................................................... 5250-0122

Co-57 0.370 MBq -(10uCi) Rod......................................................0975-137T 511

Collimator, CsI .......................................................................... 5250-0125

Collimator, CdTe.............................................................................. 5250-0112

Collimator, CsI ................................................................................. 5250-0113

EuroProbe3 Surgical Probe, CdTe, Bent....................................... 5250-0116

EuroProbe3 Bluetooth 511 Collimator .......................................... 5250-0153

Surgical Probe Sheath ..................................................................... 5250-0094

EuroProbe3 Source Holder............................................................. 5230-2124

EuroProbe3 footswitch, standard 2m cable .................................. 5250-0115

EuroProbe3 footswitch, 5m cable................................................... 5250-0172

 

 


EUROPROBE3 OPTIONAL COMPONENTS

 

Capintec 2015 Catalog 529BLUETOOTH PROBE SPECIFICATIONS

• Detector: Detector Crystal: CsI 10mm long x 5mm diameter coupled to a 25mm² silicon photodiode

• Energy Range: 100 keV to 1 MeV (Tc-99m, In-111, I-131, F18)

• Probe Dimensions: Probe Length 261 mm Diameter 11 mm

• Collimation: The collimator is integrated in the probe

• Weight: 200g

• Protection IP: IP64

• Probe Battery: Pile Li-SOCL² 1/2AA 3,6V SAFT LS 14250

• Wireless Connection: Module Bluetooth ID: ES9LMX9838

• Decontamination: By Immersion, ONLY AFTER THE BATTERY HAS BEEN REMOVED

 

Capintec 2015 Catalog 528CDTE LOW ENERGY PROBE SPECIFICATIONS

• Semiconductor crystal either CdTe or CdZnTe: 5x5x3mm3 CdTe or CdZnTe (Cadmium Telluride)

• Energy Range: 20 to 300 keV (can also be used from 170 to 364 keV, but the detection efficiency within this range is better with the CsI probe)

• Detector efficiency for I-125 (27-35 keV): > 80%

• Detector efficiency for Tc- 99m (140 keV): > 60%

• Storage Temperature: +1°C to +40°C

• Operating Temperature Range: +15°C to +40°C

• Final Size of the Probe: Length = 175mm, detection head diameter = 11 mm. Slightly angled to permit easier access to certain tissues. The collimator is an integral part of the probe.

• Weight: 5 oz. (140 g) (excluding cable)

• Maximum ambient humidity for good operation: 80% at 40°C

 

CSI HIGHER ENERGY PROBE SPECIFICATIONS

• Scintillator: Diameter = 5 mm, Length = 10mm CsI (T1) crystal coupled to a 25 mm2

• Silicon Photodiode Energy Range: 100 keV to 1 MeV

• Detector Efficiency for Tc-99m (140keV): > 80%

• Detector Efficiency for In-111 (245 keV): > 70%

• Detector Efficiency for I-131 (364 keV): > 45%

• Storage Temperature: +1°C to +50°C

• Operating Temperature Range: +15°C to +50°C

• Final Size of the Probe: Length = 7.2" (184mm), detection head diameter = .6" (16 mm). Slightly angled to permit easier access certain tissues. The collimator is an integral part of the probe.

• Weight: 6.2 oz. (175 g) (excluding table)

• Maximum ambient humidity for good operation: 80% at 40°C